hazırlıyorum site yok dahaSorununu bilmiyorum banada açıklar mısın ? Siteden kaydolmadığın için giremiyorsun.
authmeyi atsam olurmuAuth me'de olabilir emin değilim
kanka auth me'ye bul'a www.snownw.net fln yaz bişey bulursa ordan çözersinauthmeyi atsam olurmu
DataSource:
# What type of database do you want to use?
# Valid values: sqlite, mysql
backend: 'SQLITE'
# Enable database caching, should improve database performance
caching: true
# Database host address
mySQLHost: '127.0.0.1'
# Database port
mySQLPort: '3306'
# Username about Database Connection Infos
mySQLUsername: 'authme'
# Password about Database Connection Infos
mySQLPassword: '12345'
# Database Name, use with converters or as SQLITE database name
mySQLDatabase: 'authme'
# Table of the database
mySQLTablename: 'authme'
# Column of IDs to sort data
mySQLColumnId: 'id'
# Column for storing or checking players nickname
mySQLColumnName: 'username'
# Column for storing or checking players RealName
mySQLRealName: 'realname'
# Column for storing players passwords
mySQLColumnPassword: 'password'
# Request mysql over SSL
mySQLUseSSL: true
# Column for storing players emails
mySQLColumnEmail: 'email'
# Column for storing if a player is logged in or not
mySQLColumnLogged: 'isLogged'
# Column for storing players ips
mySQLColumnIp: 'ip'
# Column for storing players lastlogins
mySQLColumnLastLogin: 'lastlogin'
# Column for storing player LastLocation - X
mySQLlastlocX: 'x'
# Column for storing player LastLocation - Y
mySQLlastlocY: 'y'
# Column for storing player LastLocation - Z
mySQLlastlocZ: 'z'
# Column for storing player LastLocation - World Name
mySQLlastlocWorld: 'world'
# Overrides the size of the DB Connection Pool, -1 = Auto
poolSize: -1
ExternalBoardOptions:
# Column for storing players passwords salts
mySQLColumnSalt: ''
# Column for storing players groups
mySQLColumnGroup: ''
# -1 means disabled. If you want that only activated players
# can log into your server, you can set here the group number
# of unactivated users, needed for some forum/CMS support
nonActivedUserGroup: -1
# Other MySQL columns where we need to put the username (case-sensitive)
mySQLOtherUsernameColumns: []
# How much log2 rounds needed in BCrypt (do not change if you do not know what it does)
bCryptLog2Round: 10
# phpBB table prefix defined during the phpBB installation process
phpbbTablePrefix: 'phpbb_'
# phpBB activated group ID; 2 is the default registered group defined by phpBB
phpbbActivatedGroupId: 2
# Wordpress prefix defined during WordPress installation
wordpressTablePrefix: 'wp_'
Converter:
Rakamak:
# Rakamak file name
fileName: 'users.rak'
# Rakamak use IP?
useIP: false
# Rakamak IP file name
ipFileName: 'UsersIp.rak'
CrazyLogin:
# CrazyLogin database file name
fileName: 'accounts.db'
settings:
sessions:
# Do you want to enable the session feature?
# If enabled, when a player authenticates successfully,
# his IP and his nickname is saved.
# The next time the player joins the server, if his IP
# is the same as last time and the timeout hasn't
# expired, he will not need to authenticate.
enabled: false
# After how many minutes should a session expire?
# Remember that sessions will end only after the timeout, and
# if the player's IP has changed but the timeout hasn't expired,
# the player will be kicked from the server due to invalid session
timeout: 10
# Should the session expire if the player tries to log in with
# another IP address?
sessionExpireOnIpChange: false
# Message language, available languages:
# https://github.com/AuthMe/AuthMeReloaded/blob/master/docs/translations.md
messagesLanguage: 'en'
# Log level: INFO, FINE, DEBUG. Use INFO for general messages,
# FINE for some additional detailed ones (like password failed),
# and DEBUG for debugging
logLevel: 'FINE'
# By default we schedule async tasks when talking to the database. If you want
# typical communication with the database to happen synchronously, set this to false
useAsyncTasks: true
restrictions:
# Can not authenticated players chat?
# Keep in mind that this feature also blocks all commands not
# listed in the list below.
allowChat: false
# Hide the chat log from players who are not authenticated?
hideChat: false
# Allowed commands for unauthenticated players
allowCommands:
- '/login'
- '/register'
- '/l'
- '/reg'
- '/email'
- '/captcha'
# Max number of allowed registrations per IP
# The value 0 means an unlimited number of registrations!
maxRegPerIp: 1
# Minimum allowed username length
minNicknameLength: 3
# Maximum allowed username length
maxNicknameLength: 16
# When this setting is enabled, online players can't be kicked out
# due to "Logged in from another Location"
# This setting will prevent potential security exploits.
ForceSingleSession: true
ForceSpawnLocOnJoin:
# If enabled, every player that spawn in one of the world listed in
# "ForceSpawnLocOnJoin.worlds" will be teleported to the spawnpoint after successful
# authentication. The quit location of the player will be overwritten.
# This is different from "teleportUnAuthedToSpawn" that teleport player
# to the spawnpoint on join.
enabled: false
# WorldNames where we need to force the spawn location
# Case-sensitive!
worlds:
- 'world'
- 'world_nether'
- 'world_the_end'
# This option will save the quit location of the players.
SaveQuitLocation: false
# To activate the restricted user feature you need
# to enable this option and configure the AllowedRestrictedUser field.
AllowRestrictedUser: false
# The restricted user feature will kick players listed below
# if they don't match the defined IP address. Names are case-insensitive.
# Example:
# AllowedRestrictedUser:
# - playername;127.0.0.1
AllowedRestrictedUser: []
# Should unregistered players be kicked immediately?
kickNonRegistered: true
# Should players be kicked on wrong password?
kickOnWrongPassword: true
# Should not logged in players be teleported to the spawn?
# After the authentication they will be teleported back to
# their normal position.
teleportUnAuthedToSpawn: false
# Can unregistered players walk around?
allowMovement: false
# Should not authenticated players have speed = 0?
# This will reset the fly/walk speed to default value after the login.
removeSpeed: true
# After how many seconds should players who fail to login or register
# be kicked? Set to 0 to disable.
timeout: 30
# Regex syntax of allowed characters in the player name.
allowedNicknameCharacters: '[a-zA-Z0-9_]*'
# How far can unregistered players walk?
# Set to 0 for unlimited radius
allowedMovementRadius: 100
# Should we protect the player inventory before logging in? Requires ProtocolLib.
ProtectInventoryBeforeLogIn: true
# Should we deny the tabcomplete feature before logging in? Requires ProtocolLib.
DenyTabCompleteBeforeLogin: false
# Should we display all other accounts from a player when he joins?
# permission: /authme.admin.accounts
displayOtherAccounts: false
# Ban ip when the ip is not the ip registered in database
banUnsafedIP: false
# Spawn priority; values: authme, essentials, multiverse, default
spawnPriority: 'authme,essentials,multiverse,default'
# Maximum Login authorized by IP
maxLoginPerIp: 0
# Maximum Join authorized by IP
maxJoinPerIp: 0
# AuthMe will NEVER teleport players if set to true!
noTeleport: false
# Regex syntax for allowed chars in passwords
allowedPasswordCharacters: '[\x21-\x7E]*'
# Threshold of the other accounts command, a value less than 2 means disabled.
otherAccountsCmdThreshold: 0
# Command to run when a user has more accounts than the configured threshold.
# Available variables: %playername%, %playerip%
otherAccountsCmd: 'say The player %playername% with ip %playerip% has multiple accounts!'
GameMode:
# Force survival gamemode when player joins?
ForceSurvivalMode: false
unrestrictions:
# Below you can list all account names that AuthMe will ignore
# for registration or login. Configure it at your own risk!!
# This option adds compatibility with BuildCraft and some other mods.
# It is case-insensitive! Example:
# UnrestrictedName:
# - 'npcPlayer'
# - 'npcPlayer2'
UnrestrictedName: []
security:
# Minimum length of password
minPasswordLength: 5
# Maximum length of password
passwordMaxLength: 30
# This is a very important option: every time a player joins the server,
# if they are registered, AuthMe will switch him to unLoggedInGroup.
# This should prevent all major exploits.
# You can set up your permission plugin with this special group to have no permissions,
# or only permission to chat (or permission to send private messages etc.).
# The better way is to set up this group with few permissions, so if a player
# tries to exploit an account they can do only what you've defined for the group.
# After, a logged in player will be moved to his correct permissions group!
# Please note that the group name is case-sensitive, so 'admin' is different from 'Admin'
# Otherwise your group will be wiped and the player will join in the default group []!
# Example unLoggedinGroup: NotLogged
unLoggedinGroup: 'unLoggedinGroup'
# Possible values: SHA256, BCRYPT, BCRYPT2Y, PBKDF2, SALTEDSHA512, WHIRLPOOL,
# MYBB, IPB3, PHPBB, PHPFUSION, SMF, XENFORO, XAUTH, JOOMLA, WBB3, WBB4, MD5VB,
# PBKDF2DJANGO, WORDPRESS, ROYALAUTH, CUSTOM (for developers only). See full list at
# https://github.com/AuthMe/AuthMeReloaded/blob/master/docs/hash_algorithms.md
passwordHash: 'SHA256'
# Salt length for the SALTED2MD5 MD5(MD5(password)+salt)
doubleMD5SaltLength: 8
# If a password check fails, AuthMe will also try to check with the following hash methods.
# Use this setting when you change from one hash method to another.
# AuthMe will update the password to the new hash. Example:
# legacyHashes:
# - 'SHA1'
legacyHashes: []
# Number of rounds to use if passwordHash is set to PBKDF2. Default is 10000
pbkdf2Rounds: 10000
# Prevent unsafe passwords from being used; put them in lowercase!
# You should always set 'help' as unsafePassword due to possible conflicts.
# unsafePasswords:
# - '123456'
# - 'password'
# - 'help'
unsafePasswords:
- '123456'
- 'password'
- 'qwerty'
- '12345'
- '54321'
- '123456789'
- 'help'
registration:
# Enable registration on the server?
enabled: false
# Send every X seconds a message to a player to
# remind him that he has to login/register
messageInterval: 5
# Only registered and logged in players can play.
# See restrictions for exceptions
force: true
# Type of registration: PASSWORD or EMAIL
# PASSWORD = account is registered with a password supplied by the user;
# EMAIL = password is generated and sent to the email provided by the user.
# More info at https://github.com/AuthMe/AuthMeReloaded/wiki/Registration
type: 'PASSWORD'
# Second argument the /register command should take: NONE = no 2nd argument
# CONFIRMATION = must repeat first argument (pass or email)
# EMAIL_OPTIONAL = for password register: 2nd argument can be empty or have email address
# EMAIL_MANDATORY = for password register: 2nd argument MUST be an email address
secondArg: 'CONFIRMATION'
# Do we force kick a player after a successful registration?
# Do not use with login feature below
forceKickAfterRegister: false
# Does AuthMe need to enforce a /login after a successful registration?
forceLoginAfterRegister: false
# Enable to display the welcome message (welcome.txt) after a login
# You can use colors in this welcome.txt + some replaced strings:
# {PLAYER}: player name, {ONLINE}: display number of online players,
# {MAXPLAYERS}: display server slots, {IP}: player ip, {LOGINS}: number of players logged,
# {WORLD}: player current world, {SERVER}: server name
# {VERSION}: get current bukkit version, {COUNTRY}: player country
useWelcomeMessage: false
# Broadcast the welcome message to the server or only to the player?
# set true for server or false for player
broadcastWelcomeMessage: false
# Should we delay the join message and display it once the player has logged in?
delayJoinMessage: false
# The custom join message that will be sent after a successful login,
# keep empty to use the original one.
# Available variables:
# {PLAYERNAME}: the player name (no colors)
# {DISPLAYNAME}: the player name (with colors)
customJoinMessage: ''
# Should we remove the leave messages of unlogged users?
removeUnloggedLeaveMessage: false
# Should we remove join messages altogether?
removeJoinMessage: false
# Should we remove leave messages altogether?
removeLeaveMessage: false
# Do we need to add potion effect Blinding before login/reigster?
applyBlindEffect: false
# Do we need to prevent people to login with another case?
# If Xephi is registered, then Xephi can login, but not XEPHI/xephi/XePhI
preventOtherCase: true
permission:
# Take care with this option; if you want
# to use group switching of AuthMe
# for unloggedIn players, set this setting to true.
# Default is false.
EnablePermissionCheck: false
Email:
# Email SMTP server host
mailSMTP: 'smtp.gmail.com'
# Email SMTP server port
mailPort: 465
# Email account which sends the mails
mailAccount: ''
# Email account password
mailPassword: ''
# Email address, fill when mailAccount is not the email address of the account
mailAddress: ''
# Custom sender name, replacing the mailAccount name in the email
mailSenderName: ''
# Recovery password length
RecoveryPasswordLength: 8
# Mail Subject
mailSubject: 'Your new AuthMe password'
# Like maxRegPerIP but with email
maxRegPerEmail: 1
# Recall players to add an email?
recallPlayers: false
# Delay in minute for the recall scheduler
delayRecall: 5
# Blacklist these domains for emails
emailBlacklisted:
- '10minutemail.com'
# Whitelist ONLY these domains for emails
emailWhitelisted: []
# Send the new password drawn in an image?
generateImage: false
# The OAuth2 token
emailOauth2Token: ''
Hooks:
# Do we need to hook with multiverse for spawn checking?
multiverse: true
# Do we need to hook with BungeeCord?
bungeecord: false
# Send player to this BungeeCord server after register/login
sendPlayerTo: ''
# Do we need to disable Essentials SocialSpy on join?
disableSocialSpy: false
# Do we need to force /motd Essentials command on join?
useEssentialsMotd: false
GroupOptions:
# Unregistered permission group
UnregisteredPlayerGroup: ''
# Registered permission group
RegisteredPlayerGroup: ''
Protection:
# Enable some servers protection (country based login, antibot)
enableProtection: false
# Apply the protection also to registered usernames
enableProtectionRegistered: true
# Countries allowed to join the server and register. For country codes, see
# https://dev.bukkit.org/projects/authme-reloaded/pages/countries-codes
# PLEASE USE QUOTES!
countries:
- 'US'
- 'GB'
# Countries not allowed to join the server and register
# PLEASE USE QUOTES!
countriesBlacklist:
- 'A1'
# Do we need to enable automatic antibot system?
enableAntiBot: true
# The interval in seconds
antiBotInterval: 5
# Max number of players allowed to login in the interval
# before the AntiBot system is enabled automatically
antiBotSensibility: 10
# Duration in minutes of the antibot automatic system
antiBotDuration: 10
# Delay in seconds before the antibot activation
antiBotDelay: 60
Purge:
# If enabled, AuthMe automatically purges old, unused accounts
useAutoPurge: false
# Number of days after which an account should be purged
daysBeforeRemovePlayer: 60
# Do we need to remove the player.dat file during purge process?
removePlayerDat: false
# Do we need to remove the Essentials/userdata/player.yml file during purge process?
removeEssentialsFile: false
# World where are players.dat stores
defaultWorld: 'world'
# Remove LimitedCreative/inventories/player.yml, player_creative.yml files during purge?
removeLimitedCreativesInventories: false
# Do we need to remove the AntiXRayData/PlayerData/player file during purge process?
removeAntiXRayFile: false
# Do we need to remove permissions?
removePermissions: false
Security:
SQLProblem:
# Stop the server if we can't contact the sql database
# Take care with this, if you set this to false,
# AuthMe will automatically disable and the server won't be protected!
stopServer: true
console:
# Remove passwords from console?
removePassword: true
# Copy AuthMe log output in a separate file as well?
logConsole: true
captcha:
# Enable captcha when a player uses wrong password too many times
useCaptcha: false
# Max allowed tries before a captcha is required
maxLoginTry: 5
# Captcha length
captchaLength: 5
tempban:
# Tempban a user's IP address if they enter the wrong password too many times
enableTempban: false
# How many times a user can attempt to login before their IP being tempbanned
maxLoginTries: 10
# The length of time a IP address will be tempbanned in minutes
# Default: 480 minutes, or 8 hours
tempbanLength: 480
# How many minutes before resetting the count for failed logins by IP and username
# Default: 480 minutes (8 hours)
minutesBeforeCounterReset: 480
recoveryCode:
# Number of characters a recovery code should have (0 to disable)
length: 8
# How many hours is a recovery code valid for?
validForHours: 4
BackupSystem:
# Enable or disable automatic backup
ActivateBackup: false
# Set backup at every start of server
OnServerStart: false
# Set backup at every stop of server
OnServerStop: true
# Windows only mysql installation Path
MysqlWindowsPath: 'C:\Program Files\MySQL\MySQL Server 5.1\'
Sorununuz siteden kayıtı kapatmak mı?Kod:DataSource: # What type of database do you want to use? # Valid values: sqlite, mysql backend: 'SQLITE' # Enable database caching, should improve database performance caching: true # Database host address mySQLHost: '127.0.0.1' # Database port mySQLPort: '3306' # Username about Database Connection Infos mySQLUsername: 'authme' # Password about Database Connection Infos mySQLPassword: '12345' # Database Name, use with converters or as SQLITE database name mySQLDatabase: 'authme' # Table of the database mySQLTablename: 'authme' # Column of IDs to sort data mySQLColumnId: 'id' # Column for storing or checking players nickname mySQLColumnName: 'username' # Column for storing or checking players RealName mySQLRealName: 'realname' # Column for storing players passwords mySQLColumnPassword: 'password' # Request mysql over SSL mySQLUseSSL: true # Column for storing players emails mySQLColumnEmail: 'email' # Column for storing if a player is logged in or not mySQLColumnLogged: 'isLogged' # Column for storing players ips mySQLColumnIp: 'ip' # Column for storing players lastlogins mySQLColumnLastLogin: 'lastlogin' # Column for storing player LastLocation - X mySQLlastlocX: 'x' # Column for storing player LastLocation - Y mySQLlastlocY: 'y' # Column for storing player LastLocation - Z mySQLlastlocZ: 'z' # Column for storing player LastLocation - World Name mySQLlastlocWorld: 'world' # Overrides the size of the DB Connection Pool, -1 = Auto poolSize: -1 ExternalBoardOptions: # Column for storing players passwords salts mySQLColumnSalt: '' # Column for storing players groups mySQLColumnGroup: '' # -1 means disabled. If you want that only activated players # can log into your server, you can set here the group number # of unactivated users, needed for some forum/CMS support nonActivedUserGroup: -1 # Other MySQL columns where we need to put the username (case-sensitive) mySQLOtherUsernameColumns: [] # How much log2 rounds needed in BCrypt (do not change if you do not know what it does) bCryptLog2Round: 10 # phpBB table prefix defined during the phpBB installation process phpbbTablePrefix: 'phpbb_' # phpBB activated group ID; 2 is the default registered group defined by phpBB phpbbActivatedGroupId: 2 # Wordpress prefix defined during WordPress installation wordpressTablePrefix: 'wp_' Converter: Rakamak: # Rakamak file name fileName: 'users.rak' # Rakamak use IP? useIP: false # Rakamak IP file name ipFileName: 'UsersIp.rak' CrazyLogin: # CrazyLogin database file name fileName: 'accounts.db' settings: sessions: # Do you want to enable the session feature? # If enabled, when a player authenticates successfully, # his IP and his nickname is saved. # The next time the player joins the server, if his IP # is the same as last time and the timeout hasn't # expired, he will not need to authenticate. enabled: false # After how many minutes should a session expire? # Remember that sessions will end only after the timeout, and # if the player's IP has changed but the timeout hasn't expired, # the player will be kicked from the server due to invalid session timeout: 10 # Should the session expire if the player tries to log in with # another IP address? sessionExpireOnIpChange: false # Message language, available languages: # https://github.com/AuthMe/AuthMeReloaded/blob/master/docs/translations.md messagesLanguage: 'en' # Log level: INFO, FINE, DEBUG. Use INFO for general messages, # FINE for some additional detailed ones (like password failed), # and DEBUG for debugging logLevel: 'FINE' # By default we schedule async tasks when talking to the database. If you want # typical communication with the database to happen synchronously, set this to false useAsyncTasks: true restrictions: # Can not authenticated players chat? # Keep in mind that this feature also blocks all commands not # listed in the list below. allowChat: false # Hide the chat log from players who are not authenticated? hideChat: false # Allowed commands for unauthenticated players allowCommands: - '/login' - '/register' - '/l' - '/reg' - '/email' - '/captcha' # Max number of allowed registrations per IP # The value 0 means an unlimited number of registrations! maxRegPerIp: 1 # Minimum allowed username length minNicknameLength: 3 # Maximum allowed username length maxNicknameLength: 16 # When this setting is enabled, online players can't be kicked out # due to "Logged in from another Location" # This setting will prevent potential security exploits. ForceSingleSession: true ForceSpawnLocOnJoin: # If enabled, every player that spawn in one of the world listed in # "ForceSpawnLocOnJoin.worlds" will be teleported to the spawnpoint after successful # authentication. The quit location of the player will be overwritten. # This is different from "teleportUnAuthedToSpawn" that teleport player # to the spawnpoint on join. enabled: false # WorldNames where we need to force the spawn location # Case-sensitive! worlds: - 'world' - 'world_nether' - 'world_the_end' # This option will save the quit location of the players. SaveQuitLocation: false # To activate the restricted user feature you need # to enable this option and configure the AllowedRestrictedUser field. AllowRestrictedUser: false # The restricted user feature will kick players listed below # if they don't match the defined IP address. Names are case-insensitive. # Example: # AllowedRestrictedUser: # - playername;127.0.0.1 AllowedRestrictedUser: [] # Should unregistered players be kicked immediately? kickNonRegistered: true # Should players be kicked on wrong password? kickOnWrongPassword: true # Should not logged in players be teleported to the spawn? # After the authentication they will be teleported back to # their normal position. teleportUnAuthedToSpawn: false # Can unregistered players walk around? allowMovement: false # Should not authenticated players have speed = 0? # This will reset the fly/walk speed to default value after the login. removeSpeed: true # After how many seconds should players who fail to login or register # be kicked? Set to 0 to disable. timeout: 30 # Regex syntax of allowed characters in the player name. allowedNicknameCharacters: '[a-zA-Z0-9_]*' # How far can unregistered players walk? # Set to 0 for unlimited radius allowedMovementRadius: 100 # Should we protect the player inventory before logging in? Requires ProtocolLib. ProtectInventoryBeforeLogIn: true # Should we deny the tabcomplete feature before logging in? Requires ProtocolLib. DenyTabCompleteBeforeLogin: false # Should we display all other accounts from a player when he joins? # permission: /authme.admin.accounts displayOtherAccounts: false # Ban ip when the ip is not the ip registered in database banUnsafedIP: false # Spawn priority; values: authme, essentials, multiverse, default spawnPriority: 'authme,essentials,multiverse,default' # Maximum Login authorized by IP maxLoginPerIp: 0 # Maximum Join authorized by IP maxJoinPerIp: 0 # AuthMe will NEVER teleport players if set to true! noTeleport: false # Regex syntax for allowed chars in passwords allowedPasswordCharacters: '[\x21-\x7E]*' # Threshold of the other accounts command, a value less than 2 means disabled. otherAccountsCmdThreshold: 0 # Command to run when a user has more accounts than the configured threshold. # Available variables: %playername%, %playerip% otherAccountsCmd: 'say The player %playername% with ip %playerip% has multiple accounts!' GameMode: # Force survival gamemode when player joins? ForceSurvivalMode: false unrestrictions: # Below you can list all account names that AuthMe will ignore # for registration or login. Configure it at your own risk!! # This option adds compatibility with BuildCraft and some other mods. # It is case-insensitive! Example: # UnrestrictedName: # - 'npcPlayer' # - 'npcPlayer2' UnrestrictedName: [] security: # Minimum length of password minPasswordLength: 5 # Maximum length of password passwordMaxLength: 30 # This is a very important option: every time a player joins the server, # if they are registered, AuthMe will switch him to unLoggedInGroup. # This should prevent all major exploits. # You can set up your permission plugin with this special group to have no permissions, # or only permission to chat (or permission to send private messages etc.). # The better way is to set up this group with few permissions, so if a player # tries to exploit an account they can do only what you've defined for the group. # After, a logged in player will be moved to his correct permissions group! # Please note that the group name is case-sensitive, so 'admin' is different from 'Admin' # Otherwise your group will be wiped and the player will join in the default group []! # Example unLoggedinGroup: NotLogged unLoggedinGroup: 'unLoggedinGroup' # Possible values: SHA256, BCRYPT, BCRYPT2Y, PBKDF2, SALTEDSHA512, WHIRLPOOL, # MYBB, IPB3, PHPBB, PHPFUSION, SMF, XENFORO, XAUTH, JOOMLA, WBB3, WBB4, MD5VB, # PBKDF2DJANGO, WORDPRESS, ROYALAUTH, CUSTOM (for developers only). See full list at # https://github.com/AuthMe/AuthMeReloaded/blob/master/docs/hash_algorithms.md passwordHash: 'SHA256' # Salt length for the SALTED2MD5 MD5(MD5(password)+salt) doubleMD5SaltLength: 8 # If a password check fails, AuthMe will also try to check with the following hash methods. # Use this setting when you change from one hash method to another. # AuthMe will update the password to the new hash. Example: # legacyHashes: # - 'SHA1' legacyHashes: [] # Number of rounds to use if passwordHash is set to PBKDF2. Default is 10000 pbkdf2Rounds: 10000 # Prevent unsafe passwords from being used; put them in lowercase! # You should always set 'help' as unsafePassword due to possible conflicts. # unsafePasswords: # - '123456' # - 'password' # - 'help' unsafePasswords: - '123456' - 'password' - 'qwerty' - '12345' - '54321' - '123456789' - 'help' registration: # Enable registration on the server? enabled: false # Send every X seconds a message to a player to # remind him that he has to login/register messageInterval: 5 # Only registered and logged in players can play. # See restrictions for exceptions force: true # Type of registration: PASSWORD or EMAIL # PASSWORD = account is registered with a password supplied by the user; # EMAIL = password is generated and sent to the email provided by the user. # More info at https://github.com/AuthMe/AuthMeReloaded/wiki/Registration type: 'PASSWORD' # Second argument the /register command should take: NONE = no 2nd argument # CONFIRMATION = must repeat first argument (pass or email) # EMAIL_OPTIONAL = for password register: 2nd argument can be empty or have email address # EMAIL_MANDATORY = for password register: 2nd argument MUST be an email address secondArg: 'CONFIRMATION' # Do we force kick a player after a successful registration? # Do not use with login feature below forceKickAfterRegister: false # Does AuthMe need to enforce a /login after a successful registration? forceLoginAfterRegister: false # Enable to display the welcome message (welcome.txt) after a login # You can use colors in this welcome.txt + some replaced strings: # {PLAYER}: player name, {ONLINE}: display number of online players, # {MAXPLAYERS}: display server slots, {IP}: player ip, {LOGINS}: number of players logged, # {WORLD}: player current world, {SERVER}: server name # {VERSION}: get current bukkit version, {COUNTRY}: player country useWelcomeMessage: false # Broadcast the welcome message to the server or only to the player? # set true for server or false for player broadcastWelcomeMessage: false # Should we delay the join message and display it once the player has logged in? delayJoinMessage: false # The custom join message that will be sent after a successful login, # keep empty to use the original one. # Available variables: # {PLAYERNAME}: the player name (no colors) # {DISPLAYNAME}: the player name (with colors) customJoinMessage: '' # Should we remove the leave messages of unlogged users? removeUnloggedLeaveMessage: false # Should we remove join messages altogether? removeJoinMessage: false # Should we remove leave messages altogether? removeLeaveMessage: false # Do we need to add potion effect Blinding before login/reigster? applyBlindEffect: false # Do we need to prevent people to login with another case? # If Xephi is registered, then Xephi can login, but not XEPHI/xephi/XePhI preventOtherCase: true permission: # Take care with this option; if you want # to use group switching of AuthMe # for unloggedIn players, set this setting to true. # Default is false. EnablePermissionCheck: false Email: # Email SMTP server host mailSMTP: 'smtp.gmail.com' # Email SMTP server port mailPort: 465 # Email account which sends the mails mailAccount: '' # Email account password mailPassword: '' # Email address, fill when mailAccount is not the email address of the account mailAddress: '' # Custom sender name, replacing the mailAccount name in the email mailSenderName: '' # Recovery password length RecoveryPasswordLength: 8 # Mail Subject mailSubject: 'Your new AuthMe password' # Like maxRegPerIP but with email maxRegPerEmail: 1 # Recall players to add an email? recallPlayers: false # Delay in minute for the recall scheduler delayRecall: 5 # Blacklist these domains for emails emailBlacklisted: - '10minutemail.com' # Whitelist ONLY these domains for emails emailWhitelisted: [] # Send the new password drawn in an image? generateImage: false # The OAuth2 token emailOauth2Token: '' Hooks: # Do we need to hook with multiverse for spawn checking? multiverse: true # Do we need to hook with BungeeCord? bungeecord: false # Send player to this BungeeCord server after register/login sendPlayerTo: '' # Do we need to disable Essentials SocialSpy on join? disableSocialSpy: false # Do we need to force /motd Essentials command on join? useEssentialsMotd: false GroupOptions: # Unregistered permission group UnregisteredPlayerGroup: '' # Registered permission group RegisteredPlayerGroup: '' Protection: # Enable some servers protection (country based login, antibot) enableProtection: false # Apply the protection also to registered usernames enableProtectionRegistered: true # Countries allowed to join the server and register. For country codes, see # https://dev.bukkit.org/projects/authme-reloaded/pages/countries-codes # PLEASE USE QUOTES! countries: - 'US' - 'GB' # Countries not allowed to join the server and register # PLEASE USE QUOTES! countriesBlacklist: - 'A1' # Do we need to enable automatic antibot system? enableAntiBot: true # The interval in seconds antiBotInterval: 5 # Max number of players allowed to login in the interval # before the AntiBot system is enabled automatically antiBotSensibility: 10 # Duration in minutes of the antibot automatic system antiBotDuration: 10 # Delay in seconds before the antibot activation antiBotDelay: 60 Purge: # If enabled, AuthMe automatically purges old, unused accounts useAutoPurge: false # Number of days after which an account should be purged daysBeforeRemovePlayer: 60 # Do we need to remove the player.dat file during purge process? removePlayerDat: false # Do we need to remove the Essentials/userdata/player.yml file during purge process? removeEssentialsFile: false # World where are players.dat stores defaultWorld: 'world' # Remove LimitedCreative/inventories/player.yml, player_creative.yml files during purge? removeLimitedCreativesInventories: false # Do we need to remove the AntiXRayData/PlayerData/player file during purge process? removeAntiXRayFile: false # Do we need to remove permissions? removePermissions: false Security: SQLProblem: # Stop the server if we can't contact the sql database # Take care with this, if you set this to false, # AuthMe will automatically disable and the server won't be protected! stopServer: true console: # Remove passwords from console? removePassword: true # Copy AuthMe log output in a separate file as well? logConsole: true captcha: # Enable captcha when a player uses wrong password too many times useCaptcha: false # Max allowed tries before a captcha is required maxLoginTry: 5 # Captcha length captchaLength: 5 tempban: # Tempban a user's IP address if they enter the wrong password too many times enableTempban: false # How many times a user can attempt to login before their IP being tempbanned maxLoginTries: 10 # The length of time a IP address will be tempbanned in minutes # Default: 480 minutes, or 8 hours tempbanLength: 480 # How many minutes before resetting the count for failed logins by IP and username # Default: 480 minutes (8 hours) minutesBeforeCounterReset: 480 recoveryCode: # Number of characters a recovery code should have (0 to disable) length: 8 # How many hours is a recovery code valid for? validForHours: 4 BackupSystem: # Enable or disable automatic backup ActivateBackup: false # Set backup at every start of server OnServerStart: false # Set backup at every stop of server OnServerStop: true # Windows only mysql installation Path MysqlWindowsPath: 'C:\Program Files\MySQL\MySQL Server 5.1\'
siteden kayıt yok fakat siteden kayıt olun diyorSorun nedir? Anlayamadım siteden kayıtı kapatmak mı istiyorsunuz?
Tamamsiteden kayıt yok fakat siteden kayıt olun diyor
kickNonRegistered: true |
sorun çözüldü fakat şimdide sunucunun kayıtı kapalı diyor onu nasıl değiştiririmTamam
kickNonRegistered: true
false yapın sorun çözülecektir.